Flywheel, driven plate, vibration damper, starter ring gear - BA03.30-P-1000-01A
ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 647
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 601, 602, 603 with/without automatic transmission | Engine 602.981 | Engine 604 with/without automatic transmission | |||
|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | 200 |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| 10.9 | 1st stage | Nm | 320 | - | - | ||
| Step 2 | ∠° | - | - | - | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | 25 | 25 | 25 | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | 10 | - | 10 | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | 35 | 45 | 35 | |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 47 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | 40 | - | - | |
| Step 2 | ∠° | 90 | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 605, 606 with manual transmission (TMF) | Engine 605, 606 with automatic transmission | Engine 611.960/961 | |||
|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | 200 |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| 10.9 | 1st stage | Nm | - | - | 325 | ||
| Step 2 | ∠° | - | - | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | 25 | 25 | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | 10 | 10 | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | 40 | 35 | - | |
| Step 2 | ∠° | 90 | 90 | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 45 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | - | - | |
| Step 2 | ∠° | - | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 611.962 | Engine 611.980 | Engine 611.981/983/987 | Engine 612.961/963/965/966 | |||
|---|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | 200 | 200 |
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| 10.9 | 1st stage | Nm | 325 | 325 | 325 | 325 | ||
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | - | - | - | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | - | - | - | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 45 | 45 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 612.962 | Engine 612.981 | Engine 612.967/990 | Engine 613.960/961 | |||
|---|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | - | 200 |
| Step 2 | ∠° | 90 | 90 | - | 90 | |||
| 10.9 | 1st stage | Nm | 325 | 325 | 325 | 325 | ||
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | - | - | - | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | - | - | - | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 45 | 45 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 647.981 | |||
|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | - |
| Step 2 | ∠° | - | |||
| 10.9 | 1st stage | Nm | 325 | ||
| Step 2 | ∠° | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | - | |
| Step 2 | ∠° | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | |
| Step 2 | ∠° | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | |
| Step 2 | ∠° | - | |||