Oil pan - BA01.45-P-1000-01Q
ENGINE 642
MODIFICATION NOTES
| 26.6.14 | Value changed: Drain screw to oil pan | ||
| 24.11.14 | Value changed: Drain screw to oil pan |
OIL PAN
| Number | Designation | ENGINE 642 | |||
|---|---|---|---|---|---|
| BA01.45-P-1001-01Q | Oil pan top section to bottom half of crankcase at front | M6 | Nm | 14 | |
| BA01.45-P-1002-01Q | Oil pan top section to crankcase at transmission end | M8 | Nm | 20 | |
| BA01.45-P-1003-01Q | Oil pan bottom section to oil pan top section | M6 | Nm | 14 | |
| BA01.45-P-1004-01Q | Bracket to oil pan top section | M6 | Nm | 14 | |
| M8 | Nm | 20 | |||
| BA01.45-P-1005-01Q | Oil suction pipe to oil pan and cylinder head cover | M6 | Nm | 14 | |
| BA01.45-P-1006-01Q | Drain screw to oil pan | Metal | M12 | Nm | 30 |
| M14 | Nm | 30 | |||
| M24 | Nm | 45 | |||
| Plastic | Nm | 4 | |||
| BA01.45-P-1007-01Q | Bolt, oil pan to crankcase | M6 | Nm | 14 | |
| M8 | Nm | 20 | |||
| BA01.45-P-1008-01Q | Bolt, oil pan to timing case cover | M6 | Nm | 14 | |
| BA01.45-P-1009-01Q | Screw/bolt, oil pan to crankcase sealing at rear | M6 | Nm | 14 | |
| BA01.45-P-1010-01Q | Screw/bolt, guide tube to oil pan/front axle housing | M6 | Nm | 12 | |
| BA01.45-P-1011-01Q | Screw/bolt, oil line bracket to oil pan | M6 | Nm | 11 | |
| BA01.45-P-1012-01Q | Screw/bolt, guide tube to noise damper bracket | M6 | Nm | 14 | |
| BA01.45-P-1013-01Q | Oil suction pipe on oil pan | M6 | Nm | 14 | |