Cylinder head - BA01.30-P-1000-01S
ENGINE 642
CYLINDER HEAD
| Number | Designation | ENGINE 642 | ||
|---|---|---|---|---|
| BA01.30-P-1001-01S | Bolt, cylinder head to crankcase | M8x35 | Nm | 20 |
| BA01.30-P-1002-01S | Bolt, cylinder head to crankcase M12 | Stage 1 | Nm | 10 |
| Stage 2 | Nm | 60 | ||
| Stage 3 | ∠° | 90 | ||
| Stage 4 | ∠° | 90 | ||
| Stage 5 | ∠° | 90 | ||
| BA01.30-P-1003-01S | Exhaust manifold to cylinder head (stud bolt) | Nm | 20 | |
| BA01.30-P-1004-01S | Camshaft retainer bracket on cylinder head | Nm | 8 | |
| BA01.30-P-1005-01S | Exhaust system bracket to right cylinder head | Nm | 11 | |
| BA01.30-P-1006-01S | Bolt, lifting eye to cylinder head | Nm | 14 | |