Cylinder head - BA01.30-P-1000-01P
ENGINE 640
CYLINDER HEAD
| Number | Designation | ENGINE 640 | |||
|---|---|---|---|---|---|
| BA01.30-P-1001-01P | Bolt, cylinder head to cylinder crankcase | M8 | Nm | 20 | |
| M12 | Stage 1 | Nm | 10 | ||
| Stage 2 | Nm | 80 | |||
| Stage 3 | ∠° | 90 | |||
| Stage 4 | ∠° | 90 | |||
| BA01.30-P-1002-01P | Bolt, cylinder head to timing case cover | Nm | 20 | ||
| BA01.30-P-1003-01P | Bolt, bearing cap and bridge to cylinder head | Nm | 12 | ||
| BA01.30-P-1004-01P | Bolt, front cover to cylinder head | Nm | 12 | ||
| BA01.30-P-1005-01P | Bolt, rear cover to cylinder head | M6 | Nm | 12 | |
| M8 | Nm | 26 | |||
| BA01.30-P-1006-01P | Bolt, oil filter housing to cylinder head | Nm | 12 | ||
| BA01.30-P-1007-01P | Bolt, motor suspension lug to cylinder head | Nm | 20 | ||
| BA01.30-P-1008-01P | Bolt, oil feed line to cylinder head | Nm | 14 | ||