Cylinder head - BA01.30-P-1000-01C
ENGINE 601, 602 (except 602.98), 603
CYLINDER HEAD
| Number | Designation | ENGINE 601 | ENGINE 602 except 602.98 | ||
|---|---|---|---|---|---|
| BA01.30-P-1001-01C | Threaded ring for pre-combustion chamber with vertical injection | Nm | 100 | 100 | |
| BA01.30-P-1002-01C | Threaded ring for pre-combustion chamber with oblique injection | Nm | 130 | 130 | |
| BA01.30-P-1003-01C | Bolt, cylinder head M10 | Stage 1 | Nm | 15 | 15 |
| Stage 2 | Nm | 35 | 35 | ||
| Stage 3 | ∠° | 90 | 90 | ||
| Settling time | min | 10 | 10 | ||
| Stage 4 | ∠° | 90 | 90 | ||
| BA01.30-P-1004-01C | Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing | M14 | Nm | 20 | 20 |
| M10 | Nm | 10 | 10 | ||
| BA01.30-P-1005-01C | Dual temperature sensor for preglow timer control | M14 | Nm | 25 | - |
| BA01.30-P-1006-01C | Bolt, cylinder head cover to cylinder head | Nm | 10 | 10 | |
CYLINDER HEAD
| Number | Designation | ENGINE 603 | ||
|---|---|---|---|---|
| BA01.30-P-1001-01C | Threaded ring for pre-combustion chamber with vertical injection | Nm | 100 | |
| BA01.30-P-1002-01C | Threaded ring for pre-combustion chamber with oblique injection | Nm | 130 | |
| BA01.30-P-1003-01C | Bolt, cylinder head M10 | Stage 1 | Nm | 15 |
| Stage 2 | Nm | 35 | ||
| Stage 3 | ∠° | 90 | ||
| Settling time | min | 10 | ||
| Stage 4 | ∠° | 90 | ||
| BA01.30-P-1004-01C | Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing | M14 | Nm | 20 |
| M10 | Nm | 10 | ||
| BA01.30-P-1005-01C | Dual temperature sensor for preglow timer control | M14 | Nm | 25 |
| BA01.30-P-1006-01C | Bolt, cylinder head cover to cylinder head | Nm | 10 | |