Cylinder head - BA01.30-P-1000-01A
ENGINE 604, 605, 606, 611.960/961/962/980/981/983/987, 613.960/961
CYLINDER HEAD
| Number | Designation | ENGINE 604, 605, 606 | ENGINE 611.960/961 | ||
|---|---|---|---|---|---|
| BA01.30-P-1001-01A | Threaded ring for prechamber in cylinder head | Nm | 130 | - | |
| BA01.30-P-1002-01A | Bolt, cylinder head M10 | Stage 1 | Nm | 15 | - |
| Stage 2 | Nm | 35 | - | ||
| Stage 3 | ∠° | 90 | - | ||
| Settling time | min | 10 | - | ||
| Stage 4 | ∠° | 90 | - | ||
| Picture | AR01.30-P-5800-01HA | - | |||
| BA01.30-P-1003-01A | Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing | M14 | Nm | 20 | - |
| M10 | Nm | 10 | - | ||
| BA01.30-P-1004-01A | Dual temperature sensor for preglow timer control | M14 | Nm | 25 | - |
| BA01.30-P-1005-01A | Bolt, cylinder head to timing case cover | M8 | Nm | - | 20 |
| BA01.30-P-1006-01A | Bolt, front cover to cylinder head | Nm | - | 14 | |
| BA01.30-P-1007-01A | Bolt, cylinder head to cylinder crankcase M12 | Stage 1 | Nm | - | 60 |
| Stage 2 | ∠° | - | 90 | ||
| Stage 3 | ∠° | - | 90 | ||
CYLINDER HEAD
| Number | Designation | ENGINE 611.962 | ENGINE 611.980 | ||
|---|---|---|---|---|---|
| BA01.30-P-1001-01A | Threaded ring for prechamber in cylinder head | Nm | - | - | |
| BA01.30-P-1002-01A | Bolt, cylinder head M10 | Stage 1 | Nm | - | - |
| Stage 2 | Nm | - | - | ||
| Stage 3 | ∠° | - | - | ||
| Settling time | min | - | - | ||
| Stage 4 | ∠° | - | - | ||
| Picture | - | - | |||
| BA01.30-P-1003-01A | Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing | M14 | Nm | - | - |
| M10 | Nm | - | - | ||
| BA01.30-P-1004-01A | Dual temperature sensor for preglow timer control | M14 | Nm | - | - |
| BA01.30-P-1005-01A | Bolt, cylinder head to timing case cover | M8 | Nm | 20 | 20 |
| BA01.30-P-1006-01A | Bolt, front cover to cylinder head | Nm | 14 | 14 | |
| BA01.30-P-1007-01A | Bolt, cylinder head to cylinder crankcase M12 | Stage 1 | Nm | 60 | 60 |
| Stage 2 | ∠° | 90 | 90 | ||
| Stage 3 | ∠° | 90 | 90 | ||
CYLINDER HEAD
| Number | Designation | ENGINE 611.981/983/987 | ENGINE 613.960/961 | ||
|---|---|---|---|---|---|
| BA01.30-P-1001-01A | Threaded ring for prechamber in cylinder head | Nm | - | - | |
| BA01.30-P-1002-01A | Bolt, cylinder head M10 | Stage 1 | Nm | - | - |
| Stage 2 | Nm | - | - | ||
| Stage 3 | ∠° | - | - | ||
| Settling time | min | - | - | ||
| Stage 4 | ∠° | - | - | ||
| Picture | - | - | |||
| BA01.30-P-1003-01A | Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing | M14 | Nm | - | - |
| M10 | Nm | - | - | ||
| BA01.30-P-1004-01A | Dual temperature sensor for preglow timer control | M14 | Nm | - | - |
| BA01.30-P-1005-01A | Bolt, cylinder head to timing case cover | M8 | Nm | 20 | 20 |
| BA01.30-P-1006-01A | Bolt, front cover to cylinder head | Nm | 14 | 14 | |
| BA01.30-P-1007-01A | Bolt, cylinder head to cylinder crankcase M12 | Stage 1 | Nm | 60 | 60 |
| Stage 2 | ∠° | 90 | 90 | ||
| Stage 3 | ∠° | 90 | 90 | ||