Crankcase, timing case cover, end cover - BA01.40-P-1000-01S

ENGINE 642

CYLINDER CRANKCASE, TIMING CASE COVER, END COVER

Number	Designation				ENGINE 642
BA01.40-P-1001-01S	Screw/bolt, rear end cover to cylinder crankcase	Stage 1		Nm	8
BA01.40-P-1001-01S	Screw/bolt, rear end cover to cylinder crankcase	Stage 2		Nm	10
BA01.40-P-1002-01S	Screw/bolt, front end cover to cylinder crankcase			Nm	9
BA01.40-P-1003-01S	Screw/bolt, lower crankcase section	M6		Nm	8, 5
		M8		Nm	20
		M11	Stage 1	Nm	20
			Stage 2	Nm	50
			Stage 3	∠°	90
			Stage 4	∠°	90
BA01.40-P-1004-01S	Screw/bolt, timing case cover to cylinder crankcase	M6		Nm	10
BA01.40-P-1005-01S	Screw plug, water feed, left water jacket	M24X1.5		Nm	45
BA01.40-P-1006-01S	Screw plug for pressure oil feed upstream of oil filter, external	M18X1.5		Nm	30
BA01.40-P-1007-01S	Screw plug for balance shaft, front	M20X1.5		Nm	35
BA01.40-P-1007-01S	Screw plug for balance shaft, front	M18X1.5		Nm	30
BA01.40-P-1008-01S	Screw plug for balance shaft, rear	M20X1.5		Nm	35
BA01.40-P-1009-01S	Screw/bolt, oil spray nozzle			Nm	8