Notes on application of sealant to front cover of the cylinder head - AH01.30-P-1000-02AL
MATERIALS SPECIFICATION
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1013-01A | Loctite sealant 5970 | A 003 989 98 20 |
| BR00.45-Z-1038-04A | Loctite 7200 | Henkel Loctite Deutschland GmbH |
The line (A) identifies the sealant run.
The sealing surface must be cleaned. The sealing compound must only be applied along line (A) in the form of a bead with a height and width of 1.5 mm ±0.5 mm.
The sealing compound must be applied within 10 min.
The sealing compound bead must not be spread. Only the approved sealant may be used.