LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Complete Engine - General Information >> General Information >> Notes on application of sealant to end cover with radial shaft seal >> Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06PI

Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06PI

ENGINE 642 in MODEL 203, 209 

Sealing compound application at end cover 

IMPORTANT The traced line (A) identifies the sealant run.

IMPORTANT Sealing surfaces must be free of oil and grease. Apply sealant to surfaces as a bead 1.5 mm (±0.5 mm) wide. The sealant must be applied within 10 min. The sealant bead must not be spread.

Fig 1: Identifying End Cover Sealant Applying Area With Radial Shaft Seal
G10037315Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals