Oil pump - BA18.10-P-1000-01P
ENGINE 159
| Number | Designation | ENGINE 159 | |||
|---|---|---|---|---|---|
| BA18.10-P-1001-01P | Fitted bolt, oil pump to crankcase | Stage 1 | Nm | 6 | |
| Stage 2 | ∠° | 180 | |||
| BA18.10-P-1002-01P | Oil line to oil pump/timing case | Nm | 9 | ||
| BA18.10-P-1003-01P | Bolt, drive gear to drive shaft | M8X22 | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | |||
| BA18.10-P-1004-01P | Bolt, oil pump cover to oil pump housing/cylinder crankcase lower section | Stage 1 | Nm | 5 | |
| Stage 2 | ∠° | 90 | |||
| BA18.10-P-1005-01P | Bolt, oil pump to cylinder crankcase lower section | Stage 1 | Nm | 5 | |
| Stage 2 | ∠° | 180 | |||
| BA18.10-P-1006-01P | Bolt, hydraulic valve to valve housing | Nm | 10 | ||
| BA18.10-P-1007-01P | Bolt, valve housing to oil pump housing | Nm | 10 | ||
| BA18.10-P-1008-01P | Return line to oil pump | M6X20 | Nm | 10 | |