Check engine oil level with special tool - AP18.00-P-1810MG

ENGINE 279 

MODIFICATION NOTES

10.3.15

Measuring technique altered.

Checking the engine oil level using special tool is currently not available. Check the engine oil level via the onboard computer.

	Preparatory activity
	Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
1	Allow engine to warm up	Coolant temperature at least 80 °C.
2	Turn off engine
3	Switch electronic ignition lock control unit to position "2" (circuit 15)
	Check
4	Check engine oil level via onboard computer	Using the button on the steering wheel, select the message "Measure engine oil level" in the multifunction display, start the measurement and wait for the result. Engine oil level not OK ↓ Correct the engine oil level and check again.
	Finishing activity
5	Switch electronic ignition lock control unit to position "0"