Perform initial startup of control units - AR54.21-P-0018MCE

MODEL 451.3/4 

	Startup
1	Connect Star Diagnosis		AD00.00-P-2000-04MCC
2	Enter vehicle identification number in Diagnosis Assistance system (DAS) and open main menu with "F2" button
3	Select menu "Systems" in main menu and confirm with "Button F3"
4	In the "Systems" menu, select the control unit for initial startup and confirm with the "F3" button	An "initial startup" is required when replacing the following control units: Instrument cluster (A1) Weight Sensing System (WSS) control unit (N110) with code (494) USA version Starter-alternator control unit (N129) with model 451.334/380/480 Electronic selector lever module control unit (N15/5) Restraint systems control unit (N2/7) Heater and A/C operating unit (N23) with code (I01) A/C Plus CDI control unit (N3/9) with engine 660 ME-SFI [ME] control unit (N3/10) with engine 132 SAM control unit (N10/10) Automated manual transmission control unit (N15/6) ESP control unit (N47-5) Steering assist control unit (N68) TPM [RDK] control unit (N88) with code (494) USA version
5	In the menu for the selected control unit, choose the "Initial startup" menu item and confirm with the "F3" button
6	Confirm "Notes for initial startup of control unit" with "F2" button
7	Select the "online (networked STAR DIAGNOSIS unit)" menu or "offline (no networked STAR DIAGNOSIS unit)" menu and start by pressing the "F3" button
8	Follow the further instructions in DAS.
9	Close Star Diagnosis