Charge battery - AR54.10-P-1130MCC

MODEL 451.3/4

	Remove/install
	Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices	No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
	Notes on battery		AH54.10-P-0001-01A
	Notes on AGM battery	Model 451.334/380/480	AH54.10-P-0002-01MCC
1	Remove battery	Pull vent hose out of the hole in the battery recess. Left-hand drive vehicles	AR54.10-P-0005MCC
		Right-hand drive vehicles	AR54.10-P-0005MCE
2	Charge battery according to operating instructions of charger	With a battery which is not low-maintenance remove the stop plugs, check acid level and correct if necessary.
3	Install in the reverse order