Remove/install crank window in front door - AR72.10-P-1900MCC

MODEL 451.3/4 

Shown on model 451.4 with code (V43) Power window 

Fig 1: Identifying Crank Window In Front Door Remove/Install Components - Shown On Model 451.4 With Code (V43) Power Window

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Lower crank window (1) approx. 10 cm.
2	Remove door paneling		AR72.18-P-1000MCC
3	Mark installation position of crank window (1) in area of clamping jaws (2).	When reusing crank window (1).
4	Unscrew bolts (3) on clamping jaws (2) on power window	When installing a new crank window (1) Adjust gaps of crank window (1), see: ↓	*BA72.10-P-1007-01H
		Adjust front door crank window	AR72.10-P-1950MCC
5	Remove crank window (1) upward from door shaft.
6	Install in the reverse order