Remove/install roller sun blind on panoramic sunroof - AR77.21-P-0205MCU

MODEL 451.3 with CODE (E22) Glass roof (FFO) 

Fig 1: Identifying Roller Sun Blind On Panoramic Sunroof Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Adjust left and right seat toward rear.
2	Close roller sun blind (2)	The roller sun blind (2) should be in the closed position to prevent damage when removing.
3	Remove bolts (3) from left and right guide rails (1)	Tighten bolts (3) in a crisscross pattern. Start with center bolts (3).
			*BA77.21-P-1001-01D
4	Grab roller sun blind (2) at guide rails (1) and remove from vehicle with aid of helper	When removing roller sun blinds (2), ensure that they do not roll up, otherwise they might be damaged and will have to be replaced.
5	Install in the reverse order

PANORAMIC ROOF

Number	Designation		Model 451.3
BA77.21-P-1001-01D	Bolt for roller sun blind on panoramic roof	Nm	2