Notes on D2B ring - AH82.70-P-0001-03C
MODEL 210.2 as of 7/1/98 with CODE 317 (D-net portable CTEL (D2B)) with CODE 813 (Voice control system (VCS [SBS])) without CODE 316 (MB D-net telephone (D2B)) without CODE 347 (EMERGENCY CALL system (D2B)) without CODE 351 (Auto Pilot System (APS))
- The components in the D2B ring (station components) in this case are: - Radio (A2)
- Voice control system control unit (A35/11) (for vehicles with code 813)
- Telephone interface (A34/4) (on vehicles with code 316 or 317) or TELE AID control unit (A35/8)
- The information in the D2B ring only flows in one direction (arrows). The information enters in the white insert (white) in a fiber optic cable module M1 to M3 and exits again in the red insert (red) at the next ring component.
The D2B ring only is capable of functioning as a closed circuit.
- The voice control system control unit (A35/11) and the telephone interface (A34/4) for code 317 (Portable cellular telephone) are located in the load compartment on the right side; the TELE AID control unit (A35/8) and the telephone interface (A34/4) for code 316 are located under the rear seat on the left side.
- Before the D2B ring can be expanded it is first necessary to determine the current vehicle configuration
Actual configuration for vehicles with fixed installation telephone or TELE AID and voice control system
Actual configuration for vehicles with telephone or TELE AID and voice control system (code 813)
- Print out the actual configuration of the particular vehicle and use as the basis of the conversion.