Wheel location, wheel hub - BA33.20-P-1000-01A
MODEL 140, 170, 202, 208, 210, 211, 215, 230
WHEEL CONTROL, HUB
| Number | Designation | MODEL 140 | MODEL 170 | ||
|---|---|---|---|---|---|
| BA33.20-P-1001-01A | Self-locking nut, clamp connection of upper wishbone to steering knuckle | Nm | 125 | - | |
| BA33.20-P-1002-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Initially | Nm | - | 45 |
| Inspection | Nm | - | - | ||
| BA33.20-P-1003-01A | Bolt for clamp nut to adjust front axle wheel bearing play | Nm | 11 | 11 | |
| BA33.20-P-1004-01A | Self-locking nut, supporting joint to steering knuckle | Nm | 140 | 105 | |
| BA33.20-P-1005-01A | Bolt, steering knuckle arm on steering knuckle | Nm | 80 | - | |
| BA33.20-P-1006-01A | Self-locking nut, supporting joint to lower transverse control arm | Nm | 100 | 105 | |
| BA33.20-P-1007-01A | Self-locking nut of upper wishbone on front end | Nm | - | 65 | |
| BA33.20-P-1008-01A | Self-locking nut of upper wishbone in bearing shell | Nm | 120 | - | |
| BA33.20-P-1009-01A | Self-locking nut, lower wishbone to frame | Nm | - | 120 | |
| BA33.20-P-1010-01A | Self-locking nut, lower wishbone to front axle carrier | Nm | 180 | - | |
| BA33.20-P-1011-01A | Upper wishbone to mounting plate | Nm | 75 | - | |
| BA33.20-P-1012-01A | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1013-01A | Self-locking nut, strut rod to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1014-01A | Self-locking nut, spring control arm to front axle carrier | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1015-01A | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1016-01A | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1017-01A | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1018-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1019-01A | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
WHEEL CONTROL, HUB
| Number | Designation | MODEL 202 | MODEL 208 | ||
|---|---|---|---|---|---|
| BA33.20-P-1001-01A | Self-locking nut, clamp connection of upper wishbone to steering knuckle | Nm | - | - | |
| BA33.20-P-1002-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Initially | Nm | 45 | 45 |
| Inspection | Nm | - | - | ||
| BA33.20-P-1003-01A | Bolt for clamp nut to adjust front axle wheel bearing play | Nm | 11 | 11 | |
| BA33.20-P-1004-01A | Self-locking nut, supporting joint to steering knuckle | Nm | 105 | 105 | |
| BA33.20-P-1005-01A | Bolt, steering knuckle arm on steering knuckle | Nm | - | - | |
| BA33.20-P-1006-01A | Self-locking nut, supporting joint to lower transverse control arm | Nm | 105 | 105 | |
| BA33.20-P-1007-01A | Self-locking nut of upper wishbone on front end | Nm | 65 | 65 | |
| BA33.20-P-1008-01A | Self-locking nut of upper wishbone in bearing shell | Nm | - | - | |
| BA33.20-P-1009-01A | Self-locking nut, lower wishbone to frame | Nm | 120 | 120 | |
| BA33.20-P-1010-01A | Self-locking nut, lower wishbone to front axle carrier | Nm | - | - | |
| BA33.20-P-1011-01A | Upper wishbone to mounting plate | Nm | - | - | |
| BA33.20-P-1012-01A | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1013-01A | Self-locking nut, strut rod to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1014-01A | Self-locking nut, spring control arm to front axle carrier | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1015-01A | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1016-01A | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1017-01A | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1018-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1019-01A | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
WHEEL CONTROL, HUB
| Number | Designation | MODEL 210.08/28 | MODEL 210 (except 210.08/28) | ||
|---|---|---|---|---|---|
| BA33.20-P-1001-01A | Self-locking nut, clamp connection of upper wishbone to steering knuckle | Nm | - | - | |
| BA33.20-P-1002-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Initially | Nm | 45 | 45 |
| Inspection | Nm | - | - | ||
| BA33.20-P-1003-01A | Bolt for clamp nut to adjust front axle wheel bearing play | Nm | - | 11 | |
| BA33.20-P-1004-01A | Self-locking nut, supporting joint to steering knuckle | Nm | 105 | 105 | |
| BA33.20-P-1005-01A | Bolt, steering knuckle arm on steering knuckle | Nm | - | - | |
| BA33.20-P-1006-01A | Self-locking nut, supporting joint to lower transverse control arm | Nm | 105 | 105 | |
| BA33.20-P-1007-01A | Self-locking nut of upper wishbone on front end | Nm | 65 | 65 | |
| BA33.20-P-1008-01A | Self-locking nut of upper wishbone in bearing shell | Nm | - | - | |
| BA33.20-P-1009-01A | Self-locking nut, lower wishbone to frame | Nm | - | - | |
| BA33.20-P-1010-01A | Self-locking nut, lower wishbone to front axle carrier | Nm | 110 | 120 | |
| BA33.20-P-1011-01A | Upper wishbone to mounting plate | Nm | - | - | |
| BA33.20-P-1012-01A | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1013-01A | Self-locking nut, strut rod to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1014-01A | Self-locking nut, spring control arm to front axle carrier | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1015-01A | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1016-01A | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1017-01A | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1018-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1019-01A | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
WHEEL CONTROL, HUB
| Number | Designation | MODEL 211 (except 211.08/09/28/29) | MODEL 211.08/09/28/29 | ||
|---|---|---|---|---|---|
| BA33.20-P-1001-01A | Self-locking nut, clamp connection of upper wishbone to steering knuckle | Nm | - | - | |
| BA33.20-P-1002-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Initially | Nm | - | - |
| Inspection | Nm | - | - | ||
| BA33.20-P-1003-01A | Bolt for clamp nut to adjust front axle wheel bearing play | Nm | 11 | - | |
| BA33.20-P-1004-01A | Self-locking nut, supporting joint to steering knuckle | Nm | - | - | |
| BA33.20-P-1005-01A | Bolt, steering knuckle arm on steering knuckle | Nm | - | - | |
| BA33.20-P-1006-01A | Self-locking nut, supporting joint to lower transverse control arm | Nm | - | - | |
| BA33.20-P-1007-01A | Self-locking nut of upper wishbone on front end | Nm | 50 | 50 | |
| BA33.20-P-1008-01A | Self-locking nut of upper wishbone in bearing shell | Nm | - | - | |
| BA33.20-P-1009-01A | Self-locking nut, lower wishbone to frame | Nm | - | - | |
| BA33.20-P-1010-01A | Self-locking nut, lower wishbone to front axle carrier | Nm | - | 110 | |
| BA33.20-P-1011-01A | Upper wishbone to mounting plate | Nm | - | - | |
| BA33.20-P-1012-01A | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | 50 | - |
| Stage 2 | ∠° | 60 | - | ||
| BA33.20-P-1013-01A | Self-locking nut, strut rod to steering knuckle | Stage 1 | Nm | 50 | - |
| Stage 2 | ∠° | 60 | - | ||
| BA33.20-P-1014-01A | Self-locking nut, spring control arm to front axle carrier | Stage 1 | Nm | 80 | - |
| Stage 2 | ∠° | 120 | - | ||
| BA33.20-P-1015-01A | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | 80 | - |
| Stage 2 | ∠° | 120 | - | ||
| BA33.20-P-1016-01A | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | - | 70 |
| Stage 2 | ∠° | - | 50 | ||
| BA33.20-P-1017-01A | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | - | 70 |
| Stage 2 | ∠° | - | 50 | ||
| BA33.20-P-1018-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA33.20-P-1019-01A | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 45 | 45 | ||
WHEEL CONTROL, HUB
| Number | Designation | MODEL 215 | MODEL 230 except CODE P99 | ||
|---|---|---|---|---|---|
| BA33.20-P-1001-01A | Self-locking nut, clamp connection of upper wishbone to steering knuckle | Nm | - | - | |
| BA33.20-P-1002-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Initially | Nm | - | - |
| Inspection | Nm | - | - | ||
| BA33.20-P-1003-01A | Bolt for clamp nut to adjust front axle wheel bearing play | Nm | 11 | 11 | |
| BA33.20-P-1004-01A | Self-locking nut, supporting joint to steering knuckle | Nm | - | - | |
| BA33.20-P-1005-01A | Bolt, steering knuckle arm on steering knuckle | Nm | - | - | |
| BA33.20-P-1006-01A | Self-locking nut, supporting joint to lower transverse control arm | Nm | - | - | |
| BA33.20-P-1007-01A | Self-locking nut of upper wishbone on front end | Nm | 50 | 50 | |
| BA33.20-P-1008-01A | Self-locking nut of upper wishbone in bearing shell | Nm | - | - | |
| BA33.20-P-1009-01A | Self-locking nut, lower wishbone to frame | Nm | - | - | |
| BA33.20-P-1010-01A | Self-locking nut, lower wishbone to front axle carrier | Nm | - | - | |
| BA33.20-P-1011-01A | Upper wishbone to mounting plate | Nm | - | - | |
| BA33.20-P-1012-01A | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | 50 | 50 |
| Stage 2 | ∠° | 60 | 60 | ||
| BA33.20-P-1013-01A | Self-locking nut, strut rod to steering knuckle | Stage 1 | Nm | 50 | 50 |
| Stage 2 | ∠° | 60 | 60 | ||
| BA33.20-P-1014-01A | Self-locking nut, spring control arm to front axle carrier | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 120 | 120 | ||
| BA33.20-P-1015-01A | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 120 | 120 | ||
| BA33.20-P-1016-01A | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1017-01A | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA33.20-P-1018-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA33.20-P-1019-01A | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | - | 20 |
| Stage 2 | ∠° | - | 45 | ||
WHEEL CONTROL, HUB
| Number | Designation | MODEL 230 with CODE P99 | ||
|---|---|---|---|---|
| BA33.20-P-1001-01A | Self-locking nut, clamp connection of upper wishbone to steering knuckle | Nm | - | |
| BA33.20-P-1002-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Initially | Nm | - |
| Inspection | Nm | - | ||
| BA33.20-P-1003-01A | Bolt for clamp nut to adjust front axle wheel bearing play | Nm | - | |
| BA33.20-P-1004-01A | Self-locking nut, supporting joint to steering knuckle | Nm | - | |
| BA33.20-P-1005-01A | Bolt, steering knuckle arm on steering knuckle | Nm | - | |
| BA33.20-P-1006-01A | Self-locking nut, supporting joint to lower transverse control arm | Nm | - | |
| BA33.20-P-1007-01A | Self-locking nut of upper wishbone on front end | Nm | 70 | |
| BA33.20-P-1008-01A | Self-locking nut of upper wishbone in bearing shell | Nm | - | |
| BA33.20-P-1009-01A | Self-locking nut, lower wishbone to frame | Nm | - | |
| BA33.20-P-1010-01A | Self-locking nut, lower wishbone to front axle carrier | Nm | - | |
| BA33.20-P-1011-01A | Upper wishbone to mounting plate | Nm | - | |
| BA33.20-P-1012-01A | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 60 | ||
| BA33.20-P-1013-01A | Self-locking nut, strut rod to steering knuckle | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 60 | ||
| BA33.20-P-1014-01A | Self-locking nut, spring control arm to front axle carrier | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 120 | ||
| BA33.20-P-1015-01A | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 120 | ||
| BA33.20-P-1016-01A | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA33.20-P-1017-01A | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA33.20-P-1018-01A | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 60 | ||
| BA33.20-P-1019-01A | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||