Remove/install poly-V belt - AR13.22-P-1202MCU
ENGINE 132.910 in MODEL 451.3/4
| Removing | |||
| Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities | No parts of the body or limbs should be within the operating range of the mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of death caused by vehicle slipping or toppling off the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Raise vehicle with vehicle lift | ||
| 2 | Remove expansion clips (1) and remove cover (2) | ||
| 3 | Detention clamping device (5) using a wrench and secure using a suitable locking pin (6) | Fig 3 | |
| 4 | Remove poly-V belt (4) | ||
| Install | |||
| 5 | Fit on poly-V belt (4) | ||
| 6 | Detention clamping device (5) using a wrench and remove locking pin (6) | Fig 3 | |
| 7 | Position cover (2), insert expansion clip (1) and fix in place with a pin | ||
| 8 | Lower vehicle |