Teach in transponder key - AR80.57-P-0010MCC

MODEL 451.3/4 

	Teaching in
1	Connect STAR DIAGNOSIS
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04MCC
2	Enter vehicle identification number in Diagnosis Assistance system and open main menu with "Button F2"
3	Select menu "Systems" in main menu and confirm with "Button F3"
4	Select in menu "Systems" "N10/10 (SAM control unit)" and confirm with "Button F3"
5	Select in menu "N10/10 (SAM control unit)" "Control unit adaptations" and confirm with "Button F3"
6	Select in menu "Control unit adaptations" the submenu "Teach in transponder code for key" and confirm with "Button F3"
7	Select in submenu "Teach in transponder code for key" the submenu "Teach in transponder code for key" and confirm with "Button F3"
8	Press "Start button F3"
9	Enter code number for transmitter key in input field in Diagnosis Assistance system and confirm with "Button F2"	The number of the transmitter keys taught in and the status of the transmitter key in the ignition/starter switch appears on the display.
10	Start teach-in procedure by pressing "Button F2"
11	Switch ignition on and off according to the request on the display.	After completion of the teach-in procedure the message "Key taught in successfully" appears on the display.
12	Start teach-in procedure for another transmitter key by pressing "Button F3"	Insert transmitter key to be taught in into ignition/starter switch within 20 s and switch on ignition (c. 15). If the ignition (c. 15) is not switched back on within 20 s, the teach-in procedure is interrupted. After a successful teach-in procedure, the number of the transmitter key taught in appears on the display. Repeat step until all transmitter keys are taught in.
13	Complete teach-in procedure by pressing "Button F4"	The number of the transmitter keys taught in appears on the display.
14	Press "Button F2" and the complete STAR DIAGNOSIS