Use of metal dust remover - AP98.00-P-0636SM
MODEL 450, 451, 452, 454
| Application | |||
| 1 | Wash and dry the vehicle | *BR00.45-Z-1002-04A | |
| 2 | Cover door handles, windshield washer nozzles, windshield wipers and all unpainted plastic surfaces | ||
| Risk of injury caused by caustic burns due to contact with metal dust remover. | Avoid contact. Wear tight-fitting safety glasses and acid-resistant gloves. | AS98.00-Z-0003-01A | |
| 3 | Apply metal dust remover and rub in under light pressure | The metal dust remover gets rid of metal dust (flash rust) from the paint by a chemical reaction. Do not use metal dust remover for routine car washes or for cleaning other forms of dirt. |
*BR00.45-Z-1017-04A |
| 4 | Allow metal dust remover to take effect for a maximum of 10 minutes | ||
| 5 | Rinse off the vehicle with water | ||
| 6 | Wash the vehicle with auto shampoo and then dry | *BR00.45-Z-1002-04A | |
| 7 | Polish the treated surface with polish and a polishing wad | *BR00.45-Z-1013-04A | |
| 8 | Apply gloss preserver | *BR00.45-Z-1014-04A |
AUXILIARY REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1002-04A | Car shampoo | A 001 986 41 71 |
| BR00.45-Z-1013-04A | Polish, silicone free 5 l, DB supply specification 7545.00 | A 000 986 45 74 |
| BR00.45-Z-1014-04A | Gloss preservation, 500 ml, DB supply specification 7551.10 | A 000 986 44 74 |
| BR00.45-Z-1017-04A | Cleaner, flash rust 1 l | A 001 986 13 71 |