LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2012 >> Fortwo Pure >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle - Torque Specifications >> Torque Specifications >> Rear axle differential ring and pinion >> Rear axle differential ring and pinion - BA35.31-P-1000-01A

Rear axle differential ring and pinion - BA35.31-P-1000-01A

MODEL 129, 140, 170, 199, 201, 202, 203, 208, 209, 210, 211, 215, 219, 220, 230 

REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 129.060 MODEL 129.058/063 as of 6/1/94, 129.059/064
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 129.061/066, 129.058/063 up to 31.05.94 MODEL 129.067, 129.076 up to 1/31/98
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 125
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 129.068, 129.076 as of 2/1/98 MODEL 140.02/03/04/063/1
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 140.05/07 MODEL 170.435
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm 125 >90
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 170.444/445/447/449 MODEL 170.465/466
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 199 with rear axle center assembly Ø 210 mm MODEL 199 with rear axle center assembly Ø 215 mm
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >115 >150
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 202.018/078/120/121/122/125/180/182 except CODE 450 MODEL 202.018/078/120/121/122/125/182 with CODE 450
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >90 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 202.020/022/023/024/025/026/028/029/033/080/081/082/083/086/087/088/089/093/128/133/188/193, 202.085 with 5-speed automatic transmission, 202.134/194 except CODE 450 MODEL 202.085 with 5-speed manual transmission, MODEL 202.134/194 with CODE 450
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 203.004/204 up to 31.08.02 with CODE 450, MODEL 203.006/007/016/064/206/207/216/264/706/707 MODEL 203.004/061/204/261 as of 01.09.02, MODEL 203.008/020/040/042/043/046/052/054/056/081/084/087/092/208/240/242/243/246/252/254/256/281/284/287/292/708/730/731/740/742/743/746
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 150
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 203.018/065/218/265/718 MODEL 203.004/204 up to 31.08.02 except CODE 450, MODEL 203.035/045/235/735/745/747, 203.061/261 up to 31.08.02
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >115 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 203.076/276 MODEL 208.335/344/345/347/348/435/444/445/447/448
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm 160 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 208.365/370/465/470 MODEL 208.374
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 209.308/320/341/342/343/354/356/361/420/441/442/454/456/461 MODEL 209.365/375
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm 150 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 209.316/372/376/377/465/472/475/476/477 rear axle center assembly Ø 215 mm MODEL 209.316/376/465/475/476 rear axle center assembly Ø 210 mm
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm 160 125
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 210.003/004 except CODE 450 MODEL 210.006/015/017/025/045/053/055/063/065/08/206/215/217/225/245/263/265/281/282/283/606/663, 210.007 with CODE 450
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >90 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 210.003/004 with CODE 450, MODEL 210.007 except CODE 450, MODEL 210.010/020/035/037/048/061/062/210/235/237/248/261/262/610 MODEL 210.070/074/270/274 up to 31.01.98, 210.072/272/617
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 150
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 210.016/026/226/616, 210.070/074/216/270 ab 01.02.98 MODEL 211 (except 211.004/042/061/242/261) with rear axle center assembly Ø 187/200/215 mm
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 >160
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 211 (except 211.004/042/061/242/261) with rear axle center assembly Ø 210 mm MODEL 211 (except 211.004/042/061/242/261) with rear axle center assembly Ø 240 mm
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >115 >115
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 211.004 except CODE 450, MODEL 211.042/061/242/261 MODEL 215.375/378
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm 150 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation Model 219 with rear axle differential dia.200 mm dia. 215 mm MODEL 220.025/026/028/070/075/126/128/170/175/178
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm 150 >180
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 220.063/065/067/083/084/087/165/167/183/184/187 MODEL 230 (except 230.467, except model 230.474/475 with rear-axle transmission 210E)
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm >180 160
REAR AXLE DIFFERENTIAL RING AND PINION

Number Designation MODEL 230.467, MODEL 230.474/475 with rear-axle transmission 210E
BA35.31-P-1001-01A Collar nut, joint flange to drive pinion Nm -
scientia non olet · About LEMON Manuals