452 589 01 23 00 Press-in tool - WS62.00-P-0136K

MODEL 450, 451, 452

FG 62/Set K

Use:

Press-in device for pressing in clamping wedge between A-pillar and CQT (cockpit lateral carrier).

NOTE: Tool is preassembled for use on cars with left-hand steering (LHS) when shipped. For use on vehicles with right-hand steering (RHS) reattach the threaded block on the opposite side and turn the guide slide for the clamping wedge.
smart no.: 001 5809 V000 0000 00.

Fig 1: Identifying Press-In Tool (452 589 01 23 00)

Courtesy of MERCEDES-BENZ USA