Retrofit BRABUS front spoiler - AN88.50-P-0004MCC

MODEL 451.3/4 (except 451.391/491) up to 19.3.12 

Fig 1: Identifying Lip And Front Module

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying BRABUS Front Spoiler Related Components

Courtesy of MERCEDES-BENZ USA

MODIFICATION NOTES

16.11.11

"Document retrofitted equipment via vehicle documentation (VeDoc)" added

Operation step 10

	Remove
1	Remove front spoiler		AR88.30-P-0505MCC
	Install
2	Position sealing lip (11) on front module (12) and press on firmly
3	Clip covers (2) into BRABUS front spoiler (1)	Ensure that clips (3) are seated correctly.
4	Position BRABUS front spoiler (1) on CBS front end (4) and arrest brackets (arrows B)
5	Arrest brackets (arrows C) between BRABUS front spoiler (1) and lower front grille (5) with extraction hook	The extraction hook is included in the assembly tool set. Assembly tool set	Figure
6	Turn steering wheel to right, slightly push right fender liner to side and install expansion clip (7)
7	Turn steering wheel to left, slightly push left fender line to side and install expansion clip (9)
8	Clip brackets (arrows A) between BRABUS front spoiler (1) and underfloor paneling (6).
9	Position covers (8) on CBS front (4) and clip in clips (10)
10	Enter retrofitted equipment in Vehicle Documentation (VeDoc)	Attach note "BRABUS rear apron retrofitted according to AN88.50-P-0004MCC " to field organization texts for design group 88.

Fig 3: Identifying Assembly Tool Set (450 589 07 99 00)

Courtesy of MERCEDES-BENZ USA

PARTS ORDERING NOTES

Part no.	Designation	Quantity
DG 98	BRABUS front spoiler	1