Control unit flashing - AR54.21-P-0012MCU
MODEL 451.3/4
| Flashing | |||
|---|---|---|---|
| 1 |
Connect STAR DIAGNOSIS Connect STAR DIAGNOSIS and read out fault memory |
AD00.00-P-2000-04MCC | |
| 2 | Enter vehicle identification number in Diagnosis Assistance system and open main menu with "Button F2" | ||
| 3 | Select menu "Systems" in main menu and confirm with "Button F3" | ||
| 4 | Select the control unit to be flashed in the "systems" menu and confirm with the "F3 button" |
|
|
| 5 | Select the "Control unit adaptations" in the selected menu of the corresponding control unit and confirm with the "F3 button" | ||
| 6 | Select the submenu "Program control unit" in the "Control unit adaptations" menu and confirm with the "F3 button" | ||
| 7 | Select the "hard drive menu: Version Month/Year (year/month/day)" and confirm with the "F3 button" | ||
| 8 | Start the flashing process by pressing the "F3 button" | ||
| 9 | Select the "online (networked STAR DIAGNOSIS unit)" menu or "offline (no networked STAR DIAGNOSIS unit)" menu and start SCN coding by confirming with the "F3 button" | Only if the SCN coding command appears in the display. SCN coding with SD flash Online |
AR54.21-P-0013-02MCC |
| Offline SCN coding | AR54.21-P-0013-04MCC | ||
| Notes on SCN coding of control units | AH54.21-P-0004-01X | ||
| 10 | Close STAR DIAGNOSIS |