LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2012 >> Fortwo Passion, 2D Coupe >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the Fortwo Electric Drive, 2D Convertible, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All2.2B
Front,Both Sides1.0B
Rear,Both Sides1.4B
Combination Procedure: BRAKE HOSE: Replace:
Each Additional0.2B
OneIncludes: Bleed Brakes.0.3B
Combination Procedure: CALIPER: Replace:
Includes: Bleed Brake System.
One0.3B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,EachCorrect Rotor lateral runout by indexing or correction plate.0.2B
Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace:
Each0.1B
Combination Procedure: HUB & ROTOR DISC: Clean & Inspect:
Corrosion,EachClean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.0.2B
Combination Procedure: WHEEL CYLINDER: Replace:
Includes: Bleed Brake System.
0.3B