Notes on determining headlamp aiming values - AH82.10-P-1005-01A

MODEL ALL 

The prescribed degree of inclination for main headlamps (1) is given in % specific to the vehicle.

The prescribed degree of inclination for front fog lamps is always 2 %.

Other country-specific instructions must be observed accordingly.

Shown on MODEL 204.022 

Fig 1: Identifying Main Headlamps Inclination Degree And Model Plate (Shown On Model 204.022)

Courtesy of MERCEDES-BENZ USA

Before checking the main headlamps and front fog lamps, the respective degree of inclination is to be set at the scale of the headlamp aimer (01).

All regulations and specifications in the operating instructions from the headlamp aimer manufacturer must be observed accordingly.

Fig 2: Checking Headlamp Aimer Scale

Courtesy of MERCEDES-BENZ USA