Remove/install lamp unit - AR82.10-P-4730MCU
MODEL 451.3/4
| Remove/install | |||
| 1 | Remove front CBS | AR88.00-P-1010MCC | |
| 2 | Disconnect electrical connector (1) from left front lamp unit (E1) or right front lamp unit (E2) | ||
| 3 | Disconnect electrical connector (2) from left standing light or right standing light | ||
| 4 | Remove bolts (3) from left front lamp unit (E1) or right front lamp unit (E2) | ||
| 5 | Remove left front lamp unit (E1) and right front lamp unit (E2) | ||
| 6 | Install in the reverse order | ||
| 7 | Check and correct adjustment for left front lamp unit (E1) or right front lamp unit (E2) | ||
| AP82.10-P-8260MCC |