Remove/install center air nozzle - AR68.10-P-1150MCF
MODEL 451.3/4 as of 31.8.10 except CODE (P02) car2go
Vehicles without code (I01) Air conditioning Plus
Fig 2: Identifying Center Air Nozzle Remove/Install Components - Vehicles Without Code (I01) Air Conditioning Plus
| Remove/install | |||
| 1 | Remove center mounting console reinforcement | AR68.20-P-2340MCC | |
| 2 | Turn air distribution control lever (8) to footwell ventilation position | ||
| 3 | Move adjustment lever (7) for temperature and fan stage to uppermost position | ||
| 4 | Use a suitable screwdriver to release bracket (arrow C) of flexible shaft (3) and detach flexible shaft (3) from guide wheel (4) | ||
| 5 | Press back catch hook (arrow E) and remove eyelet (9) from relay lever (10) | Vehicles without code (I01) Air conditioning Plus | |
| 6 | Press catch hook (arrows D) together using suitable pliers and push wire out of bracket on heater housing in direction of arrow | Vehicles without code (I01) Air conditioning Plus | |
| 7 | Unscrew bolts (2) from center air vent (1) | ||
| 8 | Unclip center air vent (1) in front area (arrow B) from bracket (5) | ||
| 9 | Fold center air vent (1) out of instrument pane upper section, unhook from guides (arrows A) and remove until electrical connectors (6) are accessible | ||
| 10 | Release electrical connectors (6) and disconnect from heater/AC operating unit (N23) | ||
| 11 | Remove center air vent (1) with heater/air conditioning (N23) | ||
| 12 | Remove heater/AC operating unit (N23) | When replacing center air vent (1). | |
| Vehicles without code (I01) Air conditioning Plus | AR83.20-P-1850MCF | ||
| Vehicles with code (I01) Air conditioning Plus | AR83.25-P-1124MCF | ||
| 13 | Install in the reverse order | ||
| 14 | Perform function test on heater/air conditioning operating unit (N23) |