Rear axle shaft - BA35.30-P-1000-01A
MODEL 129, 140, 170, 171, 202, 203, 208, 209, 210, 215, 220, 240
REAR AXLE SHAFT
| Number | Designation | MODEL 129 | MODEL 170 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | - |
| not self-locking | Nm | 220 | 220 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | 100 | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 140 without special protection | MODEL 140 with special protection | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | 350 | - |
| not self-locking | Nm | 320 | 390 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | - |
| M12 | Nm | 100 | 100 | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 171 | MODEL 202 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | - |
| not self-locking | Nm | 220 | 220 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | - | 70 |
| M12 | Nm | - | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 203 | MODEL 208 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | - |
| not self-locking | Nm | 220 | 220 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | - | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 209 (except 209.377/477) except CODE P98 | MODEL 209.377/477 with CODE P98 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | 350 |
| not self-locking | Nm | 220 | 320 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | - | - |
| M12 | Nm | - | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 210.0 without special protection | MODEL 210.0 with special protection | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | 350 |
| not self-locking | Nm | 220 | 320 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | - | 100 | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 210.2/6 | MODEL 215 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | 350 | 350 |
| not self-locking | Nm | 320 | 320 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | - | 100 | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 220 | MODEL 240 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | 350 | - |
| not self-locking | Nm | 320 | 470 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | - |
| M12 | Nm | 100 | 100 | ||