Rear axle differential housing - BA35.31-P-1000-02H
MODEL 172, 204, 205, 207, 212, 218, 231, 253
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | Model 172 | MODEL 204 except CODE 700/P98 | ||
|---|---|---|---|---|---|
| BA35.31-P-1001-02H | Bolt, end cover to rear axle differential | Stage 1 | Nm | 30 | 30 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA35.31-P-1002-02H | Oil filler screw of rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1003-02H | Drain screw to rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1004-02H | Bolt, heat sink to end cover | Nm | 35 | 35 | |
| BA35.31-P-1005-02H | Threaded insert to rear axle housing | Nm | - | - | |
| BA35.31-P-1006-02H | Banjo bolt for oil line to threaded chuck | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA35.31-P-1007-02H | Banjo bolt for oil hose to oil cooler | Nm | - | - | |
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 204 with CODE P98 | MODEL 204, 212.1 with CODE 700 | ||
|---|---|---|---|---|---|
| BA35.31-P-1001-02H | Bolt, end cover to rear axle differential | Stage 1 | Nm | 30 | 73 |
| Stage 2 | ∠° | 45 | - | ||
| BA35.31-P-1002-02H | Oil filler screw of rear axle differential | Nm | 50 | 60 | |
| BA35.31-P-1003-02H | Drain screw to rear axle differential | Nm | 50 | 60 | |
| BA35.31-P-1004-02H | Bolt, heat sink to end cover | Nm | 35 | - | |
| BA35.31-P-1005-02H | Threaded insert to rear axle housing | Nm | 50 | - | |
| BA35.31-P-1006-02H | Banjo bolt for oil line to threaded chuck | Stage 1 | Nm | 5 | - |
| Stage 2 | ∠° | 90 | - | ||
| BA35.31-P-1007-02H | Banjo bolt for oil hose to oil cooler | Nm | 25 | - | |
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | Model 205 | Model 207 | ||
|---|---|---|---|---|---|
| BA35.31-P-1001-02H | Bolt, end cover to rear axle differential | Stage 1 | Nm | 30 | 30 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA35.31-P-1002-02H | Oil filler screw of rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1003-02H | Drain screw to rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1004-02H | Bolt, heat sink to end cover | Nm | 35 | 35 | |
| BA35.31-P-1005-02H | Threaded insert to rear axle housing | Nm | - | - | |
| BA35.31-P-1006-02H | Banjo bolt for oil line to threaded chuck | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA35.31-P-1007-02H | Banjo bolt for oil hose to oil cooler | Nm | - | - | |
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 212.0/2, MODEL 212.1 except CODE 700 | Model 218 | ||
|---|---|---|---|---|---|
| BA35.31-P-1001-02H | Bolt, end cover to rear axle differential | Stage 1 | Nm | 30 | 30 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA35.31-P-1002-02H | Oil filler screw of rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1003-02H | Drain screw to rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1004-02H | Bolt, heat sink to end cover | Nm | - | 35 | |
| BA35.31-P-1005-02H | Threaded insert to rear axle housing | Nm | - | - | |
| BA35.31-P-1006-02H | Banjo bolt for oil line to threaded chuck | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA35.31-P-1007-02H | Banjo bolt for oil hose to oil cooler | Nm | - | - | |
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | Model 231 | Model 253 | ||
|---|---|---|---|---|---|
| BA35.31-P-1001-02H | Bolt, end cover to rear axle differential | Stage 1 | Nm | 30 | 30 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA35.31-P-1002-02H | Oil filler screw of rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1003-02H | Drain screw to rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1004-02H | Bolt, heat sink to end cover | Nm | 35 | - | |
| BA35.31-P-1005-02H | Threaded insert to rear axle housing | Nm | - | - | |
| BA35.31-P-1006-02H | Banjo bolt for oil line to threaded chuck | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA35.31-P-1007-02H | Banjo bolt for oil hose to oil cooler | Nm | - | - | |