Rear axle differential housing - BA35.31-P-1000-02A
MODEL 124, 129, 140, 163, 170, 199, 201, 202, 208, 210, 211, 215, 220, 230, 240
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 124 | MODEL 129 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | 50 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | 150 | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 30 | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | 20 | 20 | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | - | - | ||
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 140 | MODEL 163 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | - | ||
| Stage 2 | ∠° | 45 | - | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | - | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | 20 | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | - | - | ||
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 170 | MODEL 199 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | 40 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | - | ||
| Stage 2 | ∠° | 45 | - | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | - | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | - | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 25 | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | 17 | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | - | - | ||
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 201 | MODEL 202 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | 50 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | 150 | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 25 | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | - | - | ||
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 208 | MODEL 210 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | 50 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | 150 | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 30 | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | - | 20 | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | - | - | ||
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 211 | MODEL 215 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | - | 30 | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | 35 | - | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | 25 | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | 30 | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | - | - | ||
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 220 | MODEL 230 except CODE P99 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | 30 | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | 37 | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | - | - | ||
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 230 with CODE P99 | MODEL 240 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, differential | Nm | - | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | - | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | 25 | ||
| BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | 50 | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | 40 | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | 35 | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | 35 | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | 25 | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | 25 | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | 20 | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | 30 | - | ||