Replace roll bar - AR65.20-P-1056MCO
MODEL 451.4
| Remove/install | |||
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | AS00.00-Z-0017-01A | |
| Measures for preventing damage to vehicles or components when performing electric welding work | AH00.00-P-0005-01FF | ||
| Notes on performing repair, body work and welding on vehicles with airbags and ETR units | AH91.00-P-0002-01SM | ||
| Notes on replacing body parts | AH60.00-P-0027-01FF | ||
| General information on repairs to body | AH60.00-P-0001-01FF | ||
| 1 | Remove detachable parts in the repair area | ||
| 2 | Pry out lugs (3) on roll bar (1) | ||
| 3 | Unscrew bolts (2) from roll bar (1) | ||
| 4 | Remove roll bar (1) | ||
| 5 | Install in the reverse order |