Install Brabus shift lever knob - AN68.20-P-0004MCC

MODEL 451.3/4 with CODE (V11) Softouch - automatic shift program (FFO) 

Fig 1: Identifying Adhesive Label, BRABUS Shift Lever Knob And Push-button

Courtesy of MERCEDES-BENZ USA

	Removing
1	Pull shift lever knob upward	Do not press button (3), otherwise shift lever knob can be damaged.
	Install
2	Install BRABUS shift lever knob (2)	Do not press button (3), otherwise BRABUS shift lever knob (2) can be damaged.
3	Glue on circuit diagram adhesive label (1) as shown.	The selector lever cover should be free of dust and grease in area of circuit diagram adhesive label (1).