Use of metal dust remover - AP98.00-P-0636A

MODEL All with high-gloss varnish paintwork 

	Application
1	Wash and dry the vehicle		AP98.00-P-0635-01A
		Car Wash	*BR00.45-Z-1002-04A
		Tar remover	*BR00.45-Z-1020-04A
		Insect remover	*BR00.45-Z-1021-04A
2	Cover door handles, windshield washer nozzles, windshield wipers and headlamp wipers
	Risk of injury  caused by caustic burns due to contact with metal dust remover.	Avoid contact. Wear tight-fitting safety glasses and acid-resistant gloves.	AS98.00-Z-0003-01A
3	Apply metal dust remover and rub in under light pressure	Do not treat unpainted plastic parts with metal dust remover as the plastic may become discolored. With a soft cloth or a soft brush for cleaning all painted surfaces and plastic parts. The metal dust remover gets rid of metal dust (flash rust) from the paint by a chemical reaction. Do not use metal dust remover for routine car washes or for cleaning other forms of dirt. Only use in temperatures up to maximum 25 °C. Do not clean the vehicle in direct sunlight.
		Cleaner, flash rust 1 l	*BR00.45-Z-1017-04A
4	Leave the metal dust remover to act	Never extend the acting time otherwise the paint or the plastic parts may be attacked. Allow it to work in for a maximum of 10 min. making sure that the metal dust remover does not dry. Treatment using a metal dust remover may be repeated if the cleaning effect is unsatisfactory.
5	Rinse off the vehicle with water
6	Wash and dry the vehicle		AP98.00-P-0635-01A
7	Polish the treated surface with polish and a polishing wad	Polish by hand. Depending on the condition of the paint surface, treat beforehand with a polishing machine (buffer), polishing paste and polish if necessary.	AP98.00-P-0639A
8	Apply gloss preserver	To protect the paintwork from the elements.	AP98.00-P-0641A