Notes on calibration of reversing camera - AH54.65-P-0022-01SX

MODEL 164 with CODE 498 (Japanese version) without CODE 849 (Spare wheel holder/spare wheel) 

MODEL 207, 212 up to model year 2014 with CODE 498 (Japanese version) 

MODEL 216.3 up to 5/31/07, 221.0/1 up to 5/31/07 without CODE 498 (Japanese version) 

MODEL 221.0/1, 251 with CODE 498 (Japanese version) 

Calibration of the backup camera 

The backup camera must be calibrated in the following cases:

• After replacing the reversing camera control unit.
• After removing the reversing camera.
• After adjusting or removing the trunk lid.
• After removal of the front passenger mirror on vehicles with CODE 498 (Japan version).
• After changes to the suspension which influence the suspension level.
• After work on the steering system which influences the learned steering angle values e.g. replacing the steering angle sensor.
• When using tires with another diameter.