Remove/install interior compartment flap above engine - AR88.40-P-1100-03MCC
Fig 1: Identifying Load Compartment Cover, Floor Covering, Hook Bracket And Right Trunk Paneling Laterally
- Open upper rear-end door and lower rear-end door.
On model 451.3.
Open lower rear-end door, unlock left and right lock lever and fold rear soft top upward.
Rear soft top must be engaged correctly on both sides.
- Remove load compartment cover (1).
- Fold floor covering (2) toward front and hook bracket (4) into opening (arrow) in right trunk paneling laterally (3).
Do not break or tear floor covering (2) when folding down.
- Release quick-release coupling (6).
- Remove engine compartment cover (5) from vehicle.
- Install in the reverse order.