Legend of electrical function diagram for air conditioning - PE83.30-P-2050-60MCU
MODEL 451
| Code | Designation | Coordinates |
|---|---|---|
| A1 | Instrument cluster | 21G |
| A9 | Refrigerant compressor | 3L |
| B10/6 | Evaporator temperature sensor | 12H |
| B12 | Refrigerant pressure sensor | 12H |
| B14 | Outside temperature display temperature sensor | 22E |
| M2 | Blower motor | 9K |
| M16/8 | Blend air flap actuator | 8G |
| M39 | Air recirculation flap actuator motor | 8G |
| N3/10 | ME-SFI [ME] control unit | 17D |
| N10/10 | SAM control unit | 2G |
| N23 | Heater/AC operating unit | 10G |
| R1 | Rear window defroster | 3B |
| R14 | Blower motor series resistor group | 13L |
| S98/1 | Blower switch | 11J |
| X11/4 | Data link connector | 8C |
Document number: pe83.30-p-2050-99mcu
Document title: Electrical function diagram for air conditioning
| Code: | Designation: | Position: |
|---|---|---|
| A1 | Instrument cluster | 21 G |
| A9 | AC compressor | 3 L |
| B10/6 | Evaporator temperature sensor | 12 H |
| B12 | Refrigerant pressure sensor | 12 H |
| B14 | Ambient temperature display temperature sensor | 22 E |
| M16/8 | Blending air flap actuator | 8 G |
| M2 | Blower motor | 9 L |
| M39 | Recirculated air flap actuator motor | 8 H |
| N10/10 | SAM control unit | 2 G |
| N23 | Heater/AC operating unit | 10 H |
| N3/10 | ME-SFI [ME] control module | 17 D |
| R1 | Heated rear window | 3 B |
| R14 | Blower motor preresistor group | 13 L |
| S98/1 | Blower switch | 11 J |
| X11/4 | Data link connector | 8 C |