Remove/install steering column trim - AR68.30-P-2000MCC

MODEL 451.3/ 4 

Fig 1: Identifying Steering Column Trim Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Unclip catch hook (7) on lower steering column trim (2) from brackets (5) on upper steering column trim (1) and remove lower steering column trim (2)	Installation:  First position guides (8) in area of instrument panel.
2	Unscrew bolts (3) from upper steering column trim (1)
3	Unclip bracket (6) from jacket tube in marked area (arrow) with suitable screwdriver and carefully remove upper steering column trim (1) upward	A cutout is located in the bearing shell of the jacket tube in the marked area (arrow), through which the bracket (6) is accessible. Installation:  First position guides (4) in area of instrument panel.
4	Install in the reverse order