Electrical System, Equipment & Instructions (Coupe)

• General Information
  • Information on preventing damage to electronic components due to electrostatic discharge - AH54.00-P-0001-01A
  • Notes on battery - AH54.10-P-0001-01A
  • Notes on SCN coding of control units - AH54.21-P-0004-01X
• Maintenance
  • Batteries - checking and correcting fluid level - AP54.10-P-5410MCC
• Testing & Repair
  • Testing and repair work: Smart: Electrical system, equipment and instruments - AR54.00-Z-9451CA
  • Disconnect/connect battery ground line - AR54.10-P-0003MCC
  • Remove/install battery - AR54.10-P-0005MCC
  • Treatment of battery if vehicle taken out of service - AR54.10-P-0006MCC
  • Remove/install 12 Volt socket - AR54.10-P-1000MCC
  • Check quiescent current consumption - AR54.10-P-1030MCE
  • Check battery - AR54.10-P-1129-01A
  • Check condition of battery - AR54.10-P-1129MCC
  • Charge battery - AR54.10-P-1130MCC
  • Remove/install main fuse of secondary air injection pump - AR54.15-P-0050MCU
  • Remove/install main fuse of positive line - AR54.15-P-0051MCU
  • Remove/install main fuse of positive line - AR54.15-P-0051MCV
  • Replace SAM fuses - AR54.15-P-2001MCC
  • Disconnecting and connecting electrical cables from battery - AR54.18-P-0002MCC
  • Remove/install electrical line from battery to starter/alternator - AR54.18-P-0006MCU
  • Repair wiring harness by means of axial solder connectors - AR54.18-P-0100-06A
  • Control unit flashing - AR54.21-P-0012MCU
  • SCN coding with SDflash Online - AR54.21-P-0013-02MCC
  • Offline SCN coding - AR54.21-P-0013-04MCC
  • Perform initial startup of control units - AR54.21-P-0018MCE
  • Remove/install front SAM control unit - AR54.21-P-1254MCU
  • Remove/install wiper switch - AR54.25-P-0003MCC
  • Remove/install cockpit switch group - AR54.25-P-1000MCC
  • Remove/install ignition/starter switch lock cylinder - AR54.25-P-1030MCU
  • Remove/install cruise control switch - AR54.25-P-2803MCC
  • Remove/install instrument cluster - AR54.30-P-6015MCU
  • Remove/install additional instruments - AR54.30-P-6080MCC
  • Remove/install outside temperature indicator sensor - AR54.30-P-6341MCC
  • Remove/install signaling horn - AR54.35-P-1556MCU
• Safety Precautions
  • Safety information: Electrical system, equipment and instruments - AS54.00-Z-9999ZZ
  • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
  • Risk of injury caused by contact with battery gel when handling damaged lead-gel batteries - AS54.10-Z-0001-02A
• Retrofitting & Conversion
  • Retrofit additional instruments - AZ54.30-P-0001MCC
  • Retrofit additional instruments - AZ54.30-P-0001MCD
• Torque Specifications
  • Tightening torques: Smart: Electrical system, equipment and instruments - BA54.00-Z-9999CZ
• Test & Adjustment Values
  • Test and adjustment values: Smart: Electrical system, equipment and instruments - BE54.00-Z-9999CZ
  • Test values for battery, voltage supply - BE54.10-P-1000-01A
• Basic Knowledge
  • Fuse and relay box, as-built configuration - GF54.15-P-0800MCU
  • Fuse and relay box fuse assignment - GF54.15-P-1255-20MCU
  • Fuse and relay box relay assignment - GF54.15-P-1255-21MCU
  • Fuse assignment of fuses in the interior on passenger side - GF54.15-P-1256-24MCU
  • Component description for the SAM control unit - GF54.21-P-4157MCU
  • Rain/light sensor, component description - GF54.21-P-6000MCC
  • Data link connector component description - GF54.22-P-2200MCC
  • Cockpit switch group, component description - GF54.25-P-4300MCU
  • Instrument cluster (IC [K]), display instrument and warning systems - GF54.30-P-0002-08MCU
  • Instrument cluster (IC), function - GF54.30-P-0002MCU
  • Table of contents for function description of instrument cluster (IC) - GF54.30-P-0997MCU
  • Indicator/warning messages, function - GF54.30-P-2001MCU
  • Display speed, function - GF54.30-P-3025MCU
  • Display operating conditions, function - GF54.30-P-3041MCU
  • Instrument cluster, component description - GF54.30-P-6000MCU
• Miscellaneous Notes
  • Dispose of battery - OS54.10-P-0001-01Z
• Wiring Diagrams
  • Overview of wiring diagrams for electrical system, equipment and instruments - PE54.00-P-1100MCU
  • Wiring diagram of Electronic Stability Program (ESP) - PE42.45-P-2000-97MCU
  • Wiring diagram for data link connector/diagnostic socket - PE54.22-P-2000MCU
  • Wiring diagram for data link connector/diagnostic socket - PE54.22-P-2000-97MCU
  • Wiring diagram electrical center - PE54.25-P-2000MCU
  • Wiring diagram electrical center - PE54.25-P-2000-97MCU
  • Wiring diagram electrical center - PE54.25-P-2000MCV
  • Wiring diagram electrical center - PE54.25-P-2000-97MCV
  • Wiring diagram electrical center - PE54.25-P-2000MCW
  • Wiring diagram electrical center - PE54.25-P-2000-97MCW
  • Electrical function diagram for electrical center - PE54.25-P-2050MCU
  • Wiring diagram large instrument (instrument cluster) - PE54.30-P-2001-97MCU
  • Wiring diagram of auxiliary instruments - PE54.30-P-2003MCU
  • Wiring diagram of auxiliary instruments - PE54.30-P-2003-97MCU
  • Legend of function diagram of instrument cluster (KI) electrical system - PE54.30-P-2051-60MCU
  • Electrical function diagram for instrument cluster (KI) - PE54.30-P-2051MCU
  • Wiring diagram for signaling system - PE54.35-P-2000MCU
  • Wiring diagram for signaling system - PE54.35-P-2000-97MCU
• Special Tools
  • 129 589 00 21 00 126-pin socket box - WS54.00-P-0008B
  • 220 589 00 99 00 Electrical connection kit - WS54.00-P-0050B
  • 450 589 01 63 00 Hot air blower - WS54.00-P-0062B
  • 450 589 04 63 01 Measuring resistor - WS54.00-P-0064-01B
  • 450 589 04 63 02 Probe - WS54.00-P-0064-02B
  • 450 589 04 63 00 Cable set with diagnosis case - WS54.00-P-0064B
  • 589 15 21 00 Battery tester - WS54.00-P-0066A450
  • 589 00 37 00 Pliers - WS54.00-P-0073B169
  • Special tools: Smart: Electrical system, equipment and instruments - WS54.00-Z-9999CZ