Remove/install additional instruments - AR54.30-P-6080MCF

MODEL 451.3/4 as of 31.8.10 with CODE (V31) Cockpit clock and tachometer package 

Fig 1: Identifying Additional Instruments Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Remove instrument cluster (A1)	* not for USA	AR54.30-P-6015MCC
		* for USA only	AR54.30-P-6015MCU
2	Remove covering (2) of additional instruments (A15)
3	Remove bolt (3) of additional instruments (A15)
4	Adjust driver seat to the rear
5	Unhook wiring harness for additional instruments (1) from holders (arrows) at bottom of instrument panel upper section	The wiring harness additional instrument (1) can be accessed from the driver footwell.
6	Detach the additional instrument connector (A15x1) located in the installation opening of the IC (A1)
7	Remove additional instruments (A15)
8	Install in the reverse order
9	Set clock of additional instruments (A15)