Notes on audio settings - AH82.60-P-0002-01MCC

Model 451 with code (527) High-Line radio 

Before delivery of the new car to the customer, after installation of the smart Premium radio and after every interruption of the power supply, settings must be made on the smart Premium radio in order to obtain the best sound results:

In combination with the following sound system variants, the "Dynamic Noise Covering (DNC)" must be calibrated:

• Code (C08) Radio preinstallation incl. rod antenna (FFO)
• Code (C54) Sound system 2
• Code (C17) smart surround sound system

In addition, with code (C17) smart surround sound system, the audio settings must be changed.

The equalizer must be switched off so that this function can be performed by the control unit of the surround sound system.

Optimum settings for the smart Premium radio only in combination with the surround sound system:

The procedures for calibrating and making the settings are described in the operating instructions of the radio.