Removal [07/2015 - ]: Procedure

REMOVE UPPER PANEL

Remove the service cover.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	UPPER PANEL	*b	SERVICE COVER
*c	TAB	*d	VEHICLE FRONT

Insert a remover tool into the positions shown in the figure and move it in the directions of arrows (1) to detach the clips from the rear console.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	UPPER PANEL	*b	REMOVER TOOL
*c	REAR CONSOLE	*d	CLIP

Insert a remover tool into the positions shown in the figure and move it in the directions of arrows (2) to detach the clips from the rear console.

Move the upper panel in the order of arrows (1) and (2) shown in the figure and detach the hooks from the rear console.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	UPPER PANEL	*b	REAR CONSOLE
*c	HOOK	-	-

Insert the remover tool into the positions shown in the figure and move it in the direction of arrow (1) to detach the clips from the rear console.

*a	UPPER PANEL	*b	REMOVER TOOL
*c	REAR CONSOLE	*d	CLIP

Insert the remover tool into the positions shown in the figure and move it in the direction of arrow (2) to detach the clips from the rear console.

Move the upper panel in the direction of the arrow shown in the figure, remove the upper panel while avoiding the parking brake lever.

*a	UPPER PANEL	*b	PARKING BRAKE LEVER
*c	VEHICLE FRONT	-	-

Remove the wiring harness clips.
Disconnect the commander switch connector. (With center display)
Remove the commander switch when replacing the upper panel. (With center display)
Refer to REMOVAL [07/2015 - ]