Removal [07/2015 - ]: Procedure
- REMOVE SHIFT PANEL
- Disconnect the negative battery cable.
Refer to PROCEDURE - Step 1
- Remove the following parts:
- Center console tray
See step 1
- Shift bezel
See step 1
- Upper panel
See step 1
- Shift lever knob (MTX)
Refer to PROCEDURE - Step 1
- Selector lever knob (ATX)
Refer to REMOVAL [07/2015 - ]
- Center console tray
- Pull the shift panel in the direction of the arrow shown in the figure and detach the shift panel from the rear console.
*a SHIFT PANEL *b CLIP - Pull the shift panel in the direction of the arrow shown in the figure, detach the clips from the front console box and pull out the pins from the console side panel.
*a SHIFT PANEL *b CLIP *c PIN - - - Disconnect the shift indicator connector. (ATX)
- Remove the shift panel.
- Disconnect the negative battery cable.