DTC B1207-09: Crash Input Hardwired Signal Component Failures [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
B120709	Crash Input Hardwired Signal Component Failures	Error signal received from center airbag sensor assembly (With collision detection unlock function)	Not applicable	DTC Stored	Not applicable	Drive cycle: Not applicable Self test type: CMDTC self test

DESCRIPTION	Error signal received from center airbag sensor assembly
DETECTION CONDITION	The power source control (power management control ECU) detected the following conditions for 2 s or more with the ignition switched ON (engine off or on). A signal is received which cannot normally determine the collision conditions from center airbag sensor assembly even though the collision detection unlock function presence signal received from the main body ECU determines that the function is present.
FAIL-SAFE	Not applicable
POSSIBLE CAUSE	center airbag sensor assembly malfunction
SYSTEM WIRING DIAGRAM	Not applicable