Inspection [07/2015 - ]: Procedure
- WHEEL AND TIRE SPECIFICATION STANDARD TIRE AND WHEEL (16 INCH WHEEL)
Item Specification Wheel Size 16x5 1/2J Material Steel Aluminum alloy Inset (mm (in)) 40 (1.6) Pitch circle diameter (mm (in)) 100 (3.94) Tire Size P185/60R16 86H 185/60R16 86H Air pressure
(kPa (psi))Front 250 (36) - Rear 230 (33) - Air pressure
kPa (bar, (psi))Front Up to 3 persons - 250 (2.5, (36)) Full load - 270 (2.7, (39)) Rear Up to 3 persons - 230 (2.3, (33)) Full load - 330 (3.3, (48)) Remaining tread (mm (in)) 1.6 (0.063) Wheel and tire Wheel and tire runout Lateral direction (mm (in)) 2.5 (0.098) 2.0 (0.079) Radial direction (mm (in)) 1.5 (0.059) Wheel and tire imbalance Inside (g (oz)) Knock-type*1:
9 (0.3) max.Outside (g (oz)) Adhesive-type*1:
9 (0.3) max.Adhesive-type*2:
14 (0.49) max.Lug nut tightening torque (N*m (kgf*cm, ft.*lbf)) 127.5 (1300, 94) () *1 : Do not install three or more weights. The weight of one balance weight must be 60 g (2.1 oz) or less, and the total weight of two balance weights must be 100 g (3.53 oz) or less.*2 : Do not install three or more weights. Do not affix the weights such that they are parallel to each other or overlapping. The total weight of all the weights is 160 g (5.64 oz) or less. TEMPORARY SPARE TIRE AND WHEELItem Specification Wheel Size 15x4T 14x5J Inset (mm (in)) 40 (1.6) Pitch circle diameter (mm (in)) 100 (3.94) Material Steel Tire Size T125/70D15 95M 165/65R14 79M Air pressure (kPa (psi)) 420 (60) - kPa (bar, (psi)) - 250 (2.5, (36)) Remaining tread (mm (in)) 1.6 (0.063) Wheel and tire Wheel and tire runout Lateral direction (mm (in)) 2.5 (0.098) Radial direction (mm (in)) 2.0 (0.079) Lug nut tightening torque (N*m (kgf*cm, ft.*lbf)) 127.5 (1300, 94)