LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System - Diagnostic Codes (B122602 - B000155) & Symptom Tests >> Airbag System >> DTC B1228-11: Driver Seatbelt Lap Pretensioner Deployment Control Circuit Short To Ground; DTC B1228-12: Driver Seatbelt Lap Pretensioner Deployment Control Circuit Short To Battery; DTC B1228-13: Driver Seatbelt Lap Pretensioner Deployment Control circuit o >> Contents

DTC B1228-11: Driver Seatbelt Lap Pretensioner Deployment Control Circuit Short To Ground; DTC B1228-12: Driver Seatbelt Lap Pretensioner Deployment Control Circuit Short To Battery; DTC B1228-13: Driver Seatbelt Lap Pretensioner Deployment Control circuit o: Contents

DTC No. Detection Item Trouble Area Warning Indicate Memory Fail-safe Operation Note
B122811 Driver Seatbelt Lap Pretensioner Deployment Control circuit short to ground Driver-side lap pre-tensioner seat belt circuit short to body ground Air bag system warning light
    Fig 1: Identifying Flashing Pattern: 35
    GTY491831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • Flashing pattern: 35
  • Priority ranking: 20
DTC Stored Not applicable
  • Drive cycle: Not applicable
  • Self test type: CMDTC self test, ODDTC self test
B122812 Driver Seatbelt Lap Pretensioner Deployment Control circuit short to battery Driver-side lap pre-tensioner seat belt circuit short to power supply Air bag system warning light
    Fig 2: Identifying Flashing Pattern: 35
    GTY491831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • Flashing pattern: 35
  • Priority ranking: 20
DTC Stored Not applicable
  • Drive cycle: Not applicable
  • Self test type: CMDTC self test, ODDTC self test
B122813 Driver Seatbelt Lap Pretensioner Deployment Control circuit open Driver-side lap pre-tensioner seat belt circuit open circuit or resistance high Air bag system warning light
    Fig 3: Identifying Flashing Pattern: 35
    GTY491831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • Flashing pattern: 35
  • Priority ranking: 20
DTC Stored Not applicable
  • Drive cycle: Not applicable
  • Self test type: CMDTC self test, ODDTC self test
B122819 Driver Seatbelt Lap Pretensioner Deployment Control circuit current above threshold Short circuit to driver-side lap pre-tensioner seat belt and other air bag inflator circuits Air bag system warning light
    Fig 4: Identifying Flashing Pattern: 35
    GTY491831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • Flashing pattern: 35
  • Priority ranking: 20
DTC Stored Not applicable
  • Drive cycle: Not applicable
  • Self test type: CMDTC self test, ODDTC self test
B12281A Driver Seatbelt Lap Pretensioner Deployment Control circuit resistance below threshold Driver-side lap pre-tensioner seat belt circuit resistance low Air bag system warning light
    Fig 5: Identifying Flashing Pattern: 35
    GTY491831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • Flashing pattern: 35
  • Priority ranking: 20
DTC Stored Not applicable
  • Drive cycle: Not applicable
  • Self test type: CMDTC self test, ODDTC self test
SYSTEM MALFUNCTION LOCATION
  • B122811: Driver-side lap pre-tensioner seat belt circuit short to body ground
  • B122812: Driver-side lap pre-tensioner seat belt circuit short to power supply
  • B122813: Driver-side lap pre-tensioner seat belt circuit open circuit or resistance high
  • B122819: Short circuit to driver-side lap pre-tensioner seat belt and other air bag inflator circuits
  • B12281A: Driver-side lap pre-tensioner seat belt circuit resistance low
DETECTION CONDITION
WARNING:
  • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
  • Resistance other than 0.81-6.42 ohms detected in driver-side lap pre-tensioner seat belt circuit
  • Wiring harness between the driver-side lap pre-tensioner seat belt and center airbag sensor assembly has a malfunction
FAIL-SAFE FUNCTION Not applicable
POSSIBLE CAUSE
  • Driver-side lap pre-tensioner seat belt connector malfunction
  • Short circuit to power supply or body ground in the wiring harness between the driver-side lap pretensioner seat belt and center airbag sensor assembly
  • Open circuit in the wiring harness between the driver-side lap pre-tensioner seat belt and center airbag sensor assembly
  • Driver-side lap pre-tensioner seat belt malfunction
  • Center airbag sensor assembly malfunction