LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System - Diagnostic Codes (B122602 - B000155) & Symptom Tests >> Airbag System >> DTC B1226-55: Driver Restraints Pressure Sensor Not Configured; DTC B1227-55: Passenger Restraints Pressure Sensor Not Configured [07/2015 - ] >> Contents

DTC B1226-55: Driver Restraints Pressure Sensor Not Configured; DTC B1227-55: Passenger Restraints Pressure Sensor Not Configured [07/2015 - ]: Contents

DTC No. Detection Item Trouble Area Warning Indicate Memory Fail-safe Operation Note
B122655 Driver Restraints Pressure Sensor not configured Configuration setting error (driver-side side airbag sensor (for front door) structural malfunction) Air bag system warning light
    Fig 1: Identifying Flashing Pattern: 54
    GTY491828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • Flashing pattern: 54
  • Priority ranking: 6
DTC Stored Not applicable
  • Drive cycle: Not applicable
  • Self test type: CMDTC self test, ODDTC self test
B122755 Passenger Restraints Pressure Sensor not configured Configuration setting error (passenger-side side airbag sensor (for front door) structural malfunction) Air bag system warning light
    Fig 2: Identifying Flashing Pattern: 54
    GTY495026Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • Flashing pattern: 54
  • Priority ranking: 6
DTC Stored Not applicable
  • Drive cycle: Not applicable
  • Self test type: CMDTC self test, ODDTC self test
SYSTEM MALFUNCTION LOCATION
  • B122655: Configuration setting error (driver-side side airbag sensor (for front door) structural malfunction)
  • B122755: Configuration setting error (passenger-side side airbag sensor (for front door) structural malfunction)
DETECTION CONDITION
WARNING:
  • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
  • Center airbag sensor assembly configuration setting has not been done correctly
  • Parts which have not been set to center airbag sensor assembly are assembled
FAIL-SAFE FUNCTION Not applicable
POSSIBLE CAUSE
  • Center airbag sensor assembly configuration setting not implemented
  • Center airbag sensor assembly configuration setting invalid
  • Driver or passenger-side side airbag sensor (for front door) assembly incorrect
  • center airbag sensor assembly malfunction
SYSTEM WIRING DIAGRAM Not applicable