DTC B0094-55: Center Frontal Restraints Sensor Not Configured [07/2015 - ]: Procedure

1. Perform the center airbag sensor assembly configuration using the Techstream.

   Refer to INITIALIZATION [07/2015 - ]

2. Clear the DTC for the center airbag sensor assembly using the Techstream.

   Refer to DTC CHECK / CLEAR [07/2015 - ]

   Body Electrical > Restraint Control Module > Clear DTCs 

3. Perform the DTC inspection for the center airbag sensor assembly using the Techstream.

   Refer to DTC CHECK / CLEAR [07/2015 - ]

   Body Electrical > Restraint Control Module > Trouble Codes 

4. Is the same DTC present?

   Result

   Result
   Yes
   No

Result:  2

No 

DTC TROUBLESHOOTING COMPLETED. 

Result:  1

Yes 

See step  2

1. Verify that the front airbag sensor is correctly installed.
2. Is the front airbag sensor correctly installed?

   Result

   Result
   Yes
   No

Result:  2

No 

See step  4

Result:  1

Yes 

See step  3

1. Clear the DTC for the center airbag sensor assembly using the Techstream.

   Refer to DTC CHECK / CLEAR [07/2015 - ]

   Body Electrical > Restraint Control Module > Clear DTCs 

2. Perform the DTC inspection for the center airbag sensor assembly using the Techstream.

   Refer to DTC CHECK / CLEAR [07/2015 - ]

   Body Electrical > Restraint Control Module > Trouble Codes 

3. Is the same DTC present?

   Result

   Result
   Yes
   No

Result:  1

No 

DTC TROUBLESHOOTING COMPLETED. 

Result:  2

Yes 

REPLACE THE CENTER AIRBAG SENSOR ASSEMBLY. Refer to  REMOVAL [07/2015 - ] 

1. Then go to the next step.

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  3