DTC U2013-13: Switch Pack circuit open [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
U201313	Switch Pack circuit open	Cluster switch circuit malfunction	Warning/indicator light: Not applicable	DTC stored	Not applicable	Drive cycle: Not applicable Self test type: CMDTC self test, ODDTC self test

Description	Cluster switch circuit malfunction
Detection condition	Combination meter detects an open circuit in the cluster switch circuit for 5 s or more with the ignition switched ON (engine off or on).
Fail-safe	Not applicable
Possible cause	Cluster switch connector or terminal malfunction Combination meter connector or terminal malfunction Open circuit in wiring harness between the following terminals: Combination meter terminal D55-23 - Cluster switch terminal D57-6 Combination meter terminal D55-1 - Cluster switch terminal D57-2 Cluster switch malfunction Combination meter malfunction