DTC U0515-68: Invalid Data Received From Remote Function Actuation event information [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
U051568	Invalid Data Received From Remote Function Actuation event information	Error signal received from engine stop and start ECU	Warning/indicator light: Illuminated/Flash	DTC stored	Not applicable	Drive cycle: Not applicable Self test type: CMDTC self test, ODDTC self test

Description	Error signal received from engine stop and start ECU
Detection condition	Combination meter receives the error signals from the engine stop and start ECU with the ignition switched ON (engine off or on).
Fail-safe	Not applicable
Possible cause	DTCs are stored in the engine stop and start ECU. Engine stop and start ECU malfunction Combination meter malfunction
System wiring diagram	Not applicable